Aircosaver - the air conditioner energy saver


Air conditioning has a huge potential for efficiency improvements

Air conditioning is one of the largest energy consumers in the residential and industrial sector. Thousands of air conditioners put high demands on our electricity networks. On a smaller scale, air conditioning probably accounts for a significant part of your energy bill.

Many existing air conditioners use old and quite inefficient technology. Although improved technology has become available in more expensive systems (e.g. inverter technology), the payback time of these systems is still very long and most of this technology is not suitable as an easy and economical aftermarket fit to existing systems.

Instead of investing a lot of money into an expensive new system, there is an easy and affordable way to improve the energy efficiency of your existing unit:

Upgrade it with an AIRCOSAVER™. The new product generation is now available!

The AIRCOSAVER's sensor-driven software algorithms are designed to detect thermodynamic saturation and to optimize the compressor accordingly. When overcapacity is detected, the AIRCOSAVER™ switches the compressor off and avoids inefficient overcooling.

Your unit switches into "saver mode". The fan keeps running and your system makes maximum use of the stored cooling energy in the heat exchanger. Once the stored energy is used up, the compressor can work efficiently again and is switched back on.

The set room temperature is reached without the inefficient parts (see here) of the cooling cycle. This results in significant energy savings without compromising cooling comfort.

Since the correct point to switch the compressor varies from unit to unit and changes with different weather conditions, the AIRCOSAVER™ is constantly monitoring the cooling status of your aircon unit and adapting its settings to ensure efficient operation of your air conditioning system at all times.

Protecting your unit against short cycling

Cycling the compressor too frequently in too short time intervals may harm the compressor and must be avoided. For this reason, the AIRCOSAVER™ features a built-in anti short cycling protection.

Besides the continuous anti short cycling protection, the AIRCOSAVER™ also adds a delay upon power-on to your unit. This valuable feature protects your aircon unit against damages from short power outages like they are common in many developing countries.